Plastic Test Sticks

Tear testing has been performed for more than a half century to measure the mean internal resistance of substrates to the propagation of a deliberately initiated tear to determine its dynamic resistance. Protective coverings are commonly used as for various products and plastics film is normally used as the material. Often, these low peel force films are used to protect LCD screens and other scratch-prone surfaces. The force required to remove the film is very important for both the consumer and the manufacturer. The film must be easy to remove, yet the bond must be strong enough to remain intact for product security. Some of the most common test types within plastics testing are tensile strength, elongation to break, yield strength, modulus, Poisson’s ratio, compression, flexural, shear and friction. Saicheng provides a large quantity of equipment for our packaging quality control. We appreciate Saicheng’s contribution in the construction of the testing laboratory.

These plastic standards allow plastic manufacturers and end-users to examine and evaluate their material or product of concern to ensure quality and acceptability towards safe utilization. At Atlantic, we specify high quality, high performance films that are engineered with ultimate load holding force and are also very consistent . Because of the testing we perform in the Film Lab, we can illustrate these film properties with data. With our specialized stretch film testing equipment, we participate in the development of new stretch films, working not only with film manufacturers but also with the producers of the resins used to fabricate stretch films. The ASTM D638 standard is defined as a testing method to determine the tensile strength of both reinforced and non-reinforced plastics. This protocol is performed on “dog bone” shaped samples and under different pre-treatment, temperature and humidity conditions as per the different speeds of the testing machine. Hot tack strength (the force to measure seal-strength while the film is still semi-molten) is too low, the film will not perform or run properly during the filling operation and the package may leak product after it is filled.

china air mask

Perhaps the most critical feedback is repeated sales items in the new package. The consumer responses are treated qualitatively for feedback into the new packaging process. Some types of package testing do not use scientific instruments but use people for the evaluation. When a final package design is complete, the specifications for the component materials needs to be communicated to suppliers. Packaging materials testing is often needed to identify the critical material characteristics and engineering tolerances. Ultra-low deep freezer is a novel test bureau intended to make temperature inside the chamber to recognize the adjustment in the physical attributes of material and to determine the genuine working existence of testing gadget. Furnished with CFC free refrigerants and air cooled blowers, performs molding techniques required plastic ventures. It accompanies launderable condenser channels and efficiently molded fan for keeping up cooling productivity. Blood transfusion has now turned into an exceptionally normal medicinal practice, required in numerous medications.

Our film material specialist, John Cook, has an extensive background in plastics and film development. We recognize that our work in the Film Lab and our work to get our customers set up with the right films and the right equipment is not a “one and done” project. F2 allows us to fully measure the capabilities of a candidate stretch wrap by determining how it responds to a range of low to high post stretch conditions at a variety of prestretch levels and turntable speeds. Film tension is developed by slowing the film output of the stretch carriage relative to the speed of the turntable. The goal of our Film Lab is to gather data, utilize the knowledge and experience of our film technicians, analyze the results, and make recommendations that match the best film to a particular application. Based on the data gathered during the audit, alternate films are tested in the lab tofind opportunities for a more optimal filmfor the particular application. Once we’ve determined the best films to use in your application, we follow up with training, monitoring, and technical service.

However, a significant investment in molecular and morphological design, mechanical and physical property testing and product evaluation is necessary before new materials can be introduced into these applications. At ST Instruments we provide surface measurement equipment to accelerate your research in the field of polymers and plastics. Hear an overview of the packaging industry’s analytical requirements with a focus on the accurate testing of flexible, rigid and multi-layer plastics, including compliance with essential international safety & quality regulations and standards. This video will give you insight on how Covid-19 affects and will continue to affect the industry. It will further explain how these issues are interconnected with the path to greater sustainability and recycling. Test instruments for the repeatable measurement of thickness, friction and shrink properties of plastic film. Chemical testing of a plastic or polymer material can be complex but can provide valuable information on the additives used and other substances present which is important when trying to understand material performance. Additives, in particular, can impact the polymer physical properties, stability / stabilization and general durability over the lifecycle of the polymer material. Other substances present include catalyst residues and volatile organic contaminants .

Put the sliding block with the sample fixed on the surface of the sample glued on the horizontal test bench without impact. When placing it, ensure that the test system is not stressed and the traction direction of the sample is parallel to the sliding direction. Do not touch the test surfaces of the two samples with your hands during the entire cutting and loading process, and ensure that the test surfaces of the samples are free of fingerprints, dust, etc. PPE offers the world’s largest variety of accessories for the plastics industry. We have all the molding supplies you need, from sprays and screw tips to hose and safety products. The EEL Opacimeter is used to measure opacity of plastic using a method based on the Packaging and Industrial Films Association Voluntary Standard 3/79. These surface optical properties are used in most specifications to define the visual quality of plastic, paper and board.

For many sterile liquids, powders, freeze dried formulations, and solid dosage product this means protection against reactive gases such as moisture, oxygen, and/or carbon dioxide. The LIGHTHOUSE laser absorption spectroscopy method for headspace gas analysis enables robust characterization of the primary packaging of sterile pharmaceutical drug product. Seal-Scan® technology provides advanced digital imaging software tools for process control which offers in-depth seal quality analysis. Seal-Sensor is the online configuration for automated inline scanning of pouch seals that will find defects 100% online. Tyvek® gives the premium microbial barrier protection for sterilized medical instruments and pharmaceuticals. Apart from protecting the medical devices and pharmaceutical products from physical damages, medical and pharmaceutical packages also should provide an effective microbial barrier and help to maintain the sterility of the products. Bacteria and viruses with sizes varying from 0.002 to 100 microns are a constant threat to pharmaceuticals and medical devices which in turn can be hazardous to the patients. Some MRFs use vacuum systems to suck out as much flexible plastic packaging at the as possible at the onset before it has a chance to create problems.

Paper pack must go under the bursting strength test, in which it is utilized that if the paper material has the required level of strength or not for a particular application. Burst tester is a strong rugged structure which has digital controls and is operated using a microprocessor based program. The sample clamping zone has a grooved specimen holding platform to ensure zero slippage. and Baseline products stand out as the premium performance leaders, who have set the standard for quality and reliable measurement of gases. From bench-scale to desktop to hand-held instruments, our products are used in laboratory R&D, process monitoring and control, and final quality checks. Sources of extractables include manufacturing equipment, packaging components and others such as labels, adhesives and inks. Sources of leachables can be stabilizers, antioxidants, coatings, emulsifiers, vulcanizing agents, lubricants, dyes and colorants. Pharmaceutical packaging, device packaging, container closure systems, drug delivery systems and implantables can be complex combinations of polymer, rubber, glass and other materials and all can contribute to the E&L profile of the product.

When enough example expel has left amazing, is evacuated and weighed, or the volume of the example is estimated by the machine. To meet the client’s desire and to be fit to use in the application, paper sacks experience stringent test strategies. Accessible in various sizes and quality, paper packs are reasonable for carrying every single dry thing, going from garments, staple, convenient buyer hardware and so forth. In any case, the nature of the paper sack is resolved first before choosing it for the application. The greater part of the ventures are using the plastics in some shape for a wide number of utilizations. Because of the wide use and popularity of plastics in various generation verticals, the makers create the plastics in mass to satisfy the request of countless.

This offers our customers a significant savings in terms of cost and also has benefits in terms of secure load containment , production improvements as well as a positive environmental impact . The test results from our Film Lab pinpoint stretch film properties as applied to specific conditions. Our materials specialist analyzes the test results to match the best films and the best application of those films for optimal performance and cost savings. In this regard, the ASTM D638 protocol is related to the ISO test, since the purpose of both is to demonstrate the resistance of a plastic to tensile forces. However, in its website, ASTM clarifies that the technical content of both tests is different, and therefore they are not interchangeable. The companies that are required to measure this parameter usually perform just one of the tests, with the ASTM testing method being the favorite in the North American market and area of influence.

The whole idea of packaging materials for the products is not leaving the products uncovered and unprotected. As these products are stored or transported, they need to be stay protected from factors that may affect the integrity and safety of the products like the extreme forces that act upon them during handling. There are differences forces with different amplitude acting upon the products during different stages of delivery right from the storage to the transportation. These instruments can easily assess different aspects of their quality and give information about which aspects of quality need attention and can be improved. Plastic Packaging Testing Instruments, commonly used in food, medicine, medical equipment and other industries. Plastic packaging also directly affects the quality of products, so plastic packaging companies need a lot of testing equipment to confirm whether their plastic packaging is qualified. Among them, the tightness tester is a basic instrument necessary for plastic packaging manufacturers. Because the sealing performance of the package directly affects the shelf life and quality of the product. For example, Presto which is a one of the leading manufacturer of testing instruments based in India offers packaging testing equipment as per industrial standards. ‘Box Compression Tester’ is one the packaging testing equipment offered by company and it is ASTM D4169, ASTM D642, ISO compliant.

Award Packaging Industries offers a variety of trash bags for residential, commercial, and industrial purposes. Our garbage or bin bags are the best solutions for waste management, controlling leakage and odors, and preventing invasion by pests and insects. Award Packaging Industries offer a wide range of durable packaging film, including High Density Polyethylene , Low Density Polyethylene , Polypropylene , Oxo-Biodegradable to Compostable bags. HDPE/LDPE bags can be either flat folded or on roll and both plain and printed, manufactured according to customers’ needs and demands. Pin Holes are not visible to the naked eye but often permit moisture and odor to pass through into the package and spoil the product. It is extremely important to understand the nature and source of leakage / pin holes. This is an instrument to test various forms of packages for leakage / pin hole. While bursting strength is an empirical property, this test, in combination with grammage , serves to define “standard grades” in commerce.

Paper and packaging testing instruments are vastly used in a variety of industries where paper and paper products are used. There are many industries that are involved in dealing with paper and paper products. Along with that there are packaging industries, printing and publications industries, news paper industries and so forth. The products that manufactured in these products are further used by many different industrial and domestic applications for a variety of purposes. According to the application, there are different requirements for different products when they are being used. One of the most important usages of paper products is in the packaging industries. The paper products are used for packaging and wrapping of a vast variety of products and provide protection to them from the potential threats from the external factors.

Different weights are used in the pendulum for defining different weight scales. A pointer is also given to the pendulum which helps in taking accurate readings and test results. This paper presents the development of a method to measure damage to packaging laminates by penetration. A hemispherical probe was shown to provide the most reproducible results and the rate of loading was found to be a small factor. It was shown that the presence of paper in the structure has a decisive effect on puncture resistance. For paper-based laminates, the paper layer limits the strength by rupturing first and then producing premature rupture of the other layers; the result is a 4-10-fold improvement in strength by eliminating paper as an outer layer. For laminates without paper, all layers rupture together so changing the composition of the non-paper layers has a direct influence on the puncture resistance. The direction of the penetration through the laminate usually has an effect on the energy to puncture.

Leave a Reply

Your email address will not be published. Required fields are marked *